{"id":4381,"date":"2026-03-31T11:22:15","date_gmt":"2026-03-31T09:22:15","guid":{"rendered":"https:\/\/am-hub.dk\/cases\/3d-printing-design-programme-optimises-work-gloves-for-super-strength\/"},"modified":"2026-09-02T13:11:23","modified_gmt":"2026-09-02T11:11:23","slug":"3d-printing-design-programme-optimises-work-gloves-for-super-strength","status":"publish","type":"cases","link":"https:\/\/am-hub.dk\/en\/cases\/3d-printing-design-programme-optimises-work-gloves-for-super-strength\/","title":{"rendered":"3D printing design programme optimises work gloves for super strength"},"content":{"rendered":"
\n
\n
\n

3D printing design programme optimises work gloves for super strength<\/h1>\n<\/div><\/div>\n<\/div>\n<\/div>\n<\/div>\n\n
\n
\n
\n
<\/span><\/div>\n<\/div>\n\n
\n

High Precisions Systems had ambitious goals for its newly developed exoskeleton gloves when it entered the 3D print design programme, Design for Additive Manufacturing (DfAM). Nevertheless, the company was surprised by how significantly the technology was able to improve the 3D-printed titanium gloves by halving the thickness, thereby increasing grip strength and reducing wear on the finger joints. <\/p>\n

Most people know the Iron Man films, where the superhero gains superpowers when he puts on his robotic suit. The reference to Iron Man is an obvious one when it comes to the Danish start-up High Procession Systems, which develops and manufactures exoskeleton gloves-gloves that are a necessary and important tool in industry, where daily heavy lifting requires extra grip strength. <\/p>\n

\u201cMore specifically, you can think of exoskeleton gloves as work gloves you put on to significantly increase your grip strength from the wrist and through the fingers,\u201d explains Niels K. B. Dahl, owner of High Precisions Systems.<\/p>\n<\/div><\/div>\n<\/div>\n<\/div>\n\n

\n
\n

Lighter and stronger than current exoskeleton gloves
\n<\/h3>\n<\/div><\/div>\n\n

Prior to the DfAM programme-a 3D print design optimisation programme-High Precisions Systems had already developed a new technology that enabled them to expand the application of the exoskeleton glove so that it also absorbs compressive forces.<\/p>\n

\u201cThe fact that our gloves absorb compressive forces sets us apart from our competitors in particular. Since the degree of load on a joint during movement is one of the major factors underlying the development of osteoarthritis, we can-so far as we know, uniquely-help safeguard employees\u2019 future health by removing this load,\u201d says Niels K. B. Dahl.<\/p>\n<\/div><\/div>\n<\/div>\n\n

\n
<\/span><\/div>\n<\/div>\n<\/div>\n\n
\n
\n
<\/span><\/div>\n<\/div>\n\n
\n

Participation in the DfAM programme resulted in halving the wall thickness<\/h3>\n<\/div><\/div>\n\n

Although High Precisions Systems\u2019 exoskeleton glove already had great potential prior to the DfAM programme, participation provided several important inputs for further development-especially regarding how far it was possible to push the limits of 3D printing technology in terms of wall thicknesses on the printed components. <\/p>\n

\u201cTaking part in the DfAM programme was interesting to me for several reasons, but especially because of the opportunity to investigate how thin a wall thickness it is possible to produce. Wall thicknesses are particularly interesting to us, as they are the difference between picking up a ballpoint pen with big thick winter gloves or thin, fitted surgical gloves,\u201d says Niels K. B. Dahl:<\/p>\n

\u201cIn addition, it was also important to produce test parts. It is one thing to sit and run simulations on a computer, but another to see what can actually be produced. At the same time, in some cases it can be difficult to quantify the \u2018feel\u2019 of an object. In that case, there is nothing to do but test it in real life.\u201d<\/p>\n<\/div><\/div>\n<\/div>\n<\/div>\n\n

\n
\n

A natural, thin fit \u2013 without issues
\n<\/h3>\n<\/div><\/div>\n\n

The interest in challenging the wall thickness of the parts was the starting point for launching the programme-and it delivered very positive results and renewed knowledge within 3D printing.<\/p>\n

\u201cFrom the outset, we had settled on 0.8 mm wall thickness at the thinnest points on the part. But during the programme we explored the possibilities and, with great success, brought the wall thickness all the way down to 0.4 mm despite the complex geometries. With 3D printing technology, this caused no problems, even though it is incredibly thin,\u201d says Niels K. B. Dahl. In addition to the halved wall thickness resulting in lower material consumption, it also provides a more natural fit for the glove\u2019s current and future users. <\/p>\n<\/div><\/div>\n<\/div>\n\n

\n
<\/span><\/div>\n<\/div>\n<\/div>\n\n
\n
\n

\u201cWhat I would say to others who are considering taking part in a similar programme is that you must dare to take some chances and make use of the technology available if you want to remain competitive-and here, 3D printing is a solution that cannot be ignored.\u201d<\/span><\/p>\n<\/div><\/div>\n<\/div>\n\n

\n
<\/span><\/div>\n\n

Niels K. B. Dahl<\/strong>
Founder,<\/span><\/p>\n

\n
\n
\n

High Precision Systems<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div>\n<\/div>\n<\/div>\n\n

\n
\n

Results from programmes with Dansk AM Hub<\/h3>\n<\/div><\/div>\n\n